Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?
The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.
FAQ ID:89006
SHARE URLIs a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.
FAQ ID:89011
SHARE URLWhat is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).
FAQ ID:89016
SHARE URLWhich are the Managed Long Term Services and Supports (MLTSS) assessment and care planning measures?
The MLTSS assessment and care planning measures include:
- LTSS Comprehensive Assessment and Update
- LTSS Comprehensive Care Plan and Update
- LTSS Shared Care Plan with Primary Care Practitioner(PCP)
- LTSS Reassessment/Care Plan Update after Inpatient Discharge
- Screening, Risk Assessment, and Plan of Care to Prevent Future Falls: Falls Part 1 (Screening) and Falls Part 2 (Risk Assessment and Plan of Care)
FAQ ID:89066
SHARE URLShould states require plans to report both the core and supplemental rates for the Managed Long Term Services and Supports (MLTSS) LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update measures, and LTSS Reassessment/Care Plan Update After Inpatient Discharge measures?
It is recommended that MLTSS plans report both rates. However, if the state believes there are valid reasons for not reporting both rates, such as costly changes in assessment and care planning forms and information technology systems, it might consider phasing in the supplemental rates over time. For instance, in the first year of measure use (for example, measurement year 2018), the state could require MLTSS plans to report just the core rate, and then require that MLTSS plans report both core and supplemental rates for measurement year 2019 or 2020. Although they are called "supplemental rates," they are still very important, and should be viewed as "aspirational." MLTSS plans should strive to cover more assessment and care plan elements over time.
FAQ ID:89071
SHARE URLDo I need value sets to calculate any of the five the Managed Long Term Services and Supports (MLTSS) assessment and care planning measures? If so, where can I find the value sets?
Value sets are the complete set of procedure and diagnostic codes used to identify a service or condition included in a measure. One of the assessment and care planning measures—LTSS Reassessment/Care Plan Update after Inpatient Discharge—uses value sets to identify potentially planned hospitalizations. Please see "Do I need to use value sets to calculate these measures? If so, where can I find the value sets?" for more information regarding using value sets for the three institutional rebalancing and utilization measures.
View the value sets (XLSX, 2.88 MB). Please see Table 2 in the "LTSS Value Sets to Codes" tab. Table 1 in the "LTSS Measures to Value Sets" tab shows each value set needed for each measure.
FAQ ID:89076
SHARE URLCan I use the same sample for the Managed Long Term Services and Supports (MLTSS) Part 1 of the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure as the LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update, LTSS Shared Care Plan with Primary Care Practitioner, and LTSS Reassessment/Care Plan Update after Inpatient Discharge measures?
Yes, the same sample can be used for Part 1 of the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure as the LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update, and LTSS Shared Care Plan with Primary Care Practitioner measures.
FAQ ID:89081
SHARE URLDo the data elements comprising the falls risk assessment need to be documented as part of a comprehensive assessment?
No. Although a comprehensive assessment may include falls risk assessment elements, this measure does not require the risk assessment elements to be documented as part of a comprehensive assessment. For this measure, a falls risk assessment is considered complete if the member record includes any documentation of a balance/gait assessment, and documentation of assessment of postural blood pressure, vision, home fall hazards, and/or medications.
FAQ ID:88961
SHARE URLDo the components of the risk assessment need to be completed during a single encounter?
No, the components can be completed during separate encounters, provided they are documented in the member record as having been performed between August 1 of the year prior to the measurement year and December 31 of the measurement year.
FAQ ID:88966
SHARE URLIs a standardized tool required for assessment of balance/gait?
No, a standardized tool is not required, although documentation of use of a standardized tool (for example, Get Up & Go, Berg, Tinetti) would meet the balance/gait assessment component of the measure.
FAQ ID:88971
SHARE URL
Results per page