Frequently Asked Questions

Certification is required for any new implementation, whether it is a custom- developed module that is transferred from another state, or a commercial off-the-shelf module that is being configured and integrated. The certification process looks at the state’s implementation of the solution to ensure the state has met all federal requirements.

States may reuse system documentation and other supporting evidence from a previous state certification if it is available and applicable to their systems and has been reconfirmed by independent verification and validation.

FAQ ID:93656

APDs must demonstrate a reuse-friendly design that includes the sharing of systems, modules, code, and any other developed artifacts. States could include language describing their efforts to find and learn from or reuse components from similar systems, or efforts the state is making to ensure that other states more easily can reuse the proposed system once it is developed.

FAQ ID:93661

From an intellectual property standpoint, reuse is supported by the general grant conditions for Federal Financial Participation (FFP) under 45 CFR 95.617, which require states to "include a clause in all procurement instruments that provides that the State or local government will have all ownership rights in software or modifications thereof and associated documentation designed, developed, or installed with FFP under this subpart."

Further, according to 42 CFR 433.112(6), CMS has "a royalty free, non-exclusive, and irrevocable license to reproduce, publish, or otherwise use and authorize others to use, for Federal Government purposes, software, modifications to software, and documentation that is designed, developed, installed or enhanced with 90 percent FFP."

In practice, this means that vendors retain ownership rights to software and other products they have developed under their own initiative and funding, while states and CMS have ownership rights to and may share any software, customizations, configurations, or add-ons funded with FFP.

FAQ ID:93666

Dental services are not covered under Medicare, which means the state may not compare Medicaid rates for comparable dental services for the Medicare Equivalent of the ACR. The state may calculate a dental ACR in order to make supplemental payments to dental services providers and continue to calculate the Medicare Equivalent of the ACR for other services covered by Medicare. The state should submit two separate ACR demonstrations, one for dental services and one for physician (non-dental) services. This will involve completing two versions of the Office of Management and Budget-approved template. If the same provider provides both physician and dental services the state would differentiate the provider information between the two demonstrations by appending the Medicare Certification Number (Medicare ID) (variable 112) with a letter, such as an -A or a -B. For example, if the Medicare ID was 123456, it would be depicted in the physician ACR as 123456-A and in the dental ACR as 12345-B. If a Medicare Certification Number is not available then the state should append the Medicaid Provider Number.

FAQ ID:92441

Applicants that indicate they have a disability, need long-term care or are over age 65 are always referred to the Medicaid agency for a determination on a non-MAGI basis, regardless of income and household composition, since the FFM is evaluating eligibility for MAGI-based eligibility groups only. Additionally, applicants may always request a full Medicaid determination at the end of the application process. In assessment states, the Medicaid agency will do a final determination of eligibility for these applicants, whereas in determination states, the Medicaid agency just needs to follow up for a non-MAGI determination. The expanded flat file will contain a specific indicator showing if the applicant requested a full determination.

Supplemental Links:

• This FAQ was released as part of a larger set. View the full set. (PDF, 198.3 KB)

FAQ ID:92136

The state should complete one template each for the DRG and per diem UPL calculations and these should be placed in one file. The state should also include a summary worksheet in the same file that shows the UPL gap for each ownership category (state government owned, non-state government owned, and private). States should include all necessary supporting documentation.

FAQ ID:92276

The total UPL gap by ownership category can be shown by inserting a new tab in the file with these calculations, unless a summary worksheet is already included in the workbook. If there are any questions about how to add this tab, please reach out to your CMS Regional Office or send a follow-up question (with your template) to the UPL mailbox and additional guidance will be provided.

FAQ ID:92281

When a Medicare provider number is not available, such as for some nursing facilities, the state should populate variable 112 using the acronym NMC, which stands for "Not Medicare Certified". Adding this information will help to clearly identify the facility's status.

FAQ ID:92286

The state should report the expected amount of supplemental payments to be made during the period covered by the UPL demonstration. Supplemental payments should be entered into variables 303.1, 303.2, and 303.3 for the Inpatient Hospital and Outpatient Hospital templates and 313.1, 313.2, and 313.3 for the Nursing Facility templates. The state should provide detail in the notes tab on the types of supplemental payments and the related dollar amount of each payment.

FAQ ID:92291

A state may report adjustments by using the following variables: Adjustments to Medicare Per Diem #1 - Variable 212.1 and Adjustments to Medicare Per Diem #2 - Variable 212.2 for the Medicare Per Diem and Adjustment to Medicaid Per Diem #1 - Variable 314.1 and Adjustment to Medicaid Per Diem #2 - Variable 314.2 for the Medicaid Per Diem. A state may report more than one adjustment under a single variable. For example, if the state has three adjustments to their Medicaid per diem, one of these adjustments can be reported in variable 314.1 and the other two adjustments can be added together and reported in variable 314.2. When reporting any adjustment, the state must provide a detailed description of the adjustment(s) in the notes tab.

FAQ ID:92296