U.S. flag

An official website of the United States government

Frequently Asked Questions

Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.

Showing 1 to 10 of 64 results

Which are the Managed Long Term Services and Supports (MLTSS) assessment and care planning measures?

The MLTSS assessment and care planning measures include:

  • LTSS Comprehensive Assessment and Update
  • LTSS Comprehensive Care Plan and Update
  • LTSS Shared Care Plan with Primary Care Practitioner(PCP)
  • LTSS Reassessment/Care Plan Update after Inpatient Discharge
  • Screening, Risk Assessment, and Plan of Care to Prevent Future Falls: Falls Part 1 (Screening) and Falls Part 2 (Risk Assessment and Plan of Care)

FAQ ID:89066

SHARE URL

Should states require plans to report both the core and supplemental rates for the Managed Long Term Services and Supports (MLTSS) LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update measures, and LTSS Reassessment/Care Plan Update After Inpatient Discharge measures?

It is recommended that MLTSS plans report both rates. However, if the state believes there are valid reasons for not reporting both rates, such as costly changes in assessment and care planning forms and information technology systems, it might consider phasing in the supplemental rates over time. For instance, in the first year of measure use (for example, measurement year 2018), the state could require MLTSS plans to report just the core rate, and then require that MLTSS plans report both core and supplemental rates for measurement year 2019 or 2020. Although they are called "supplemental rates," they are still very important, and should be viewed as "aspirational." MLTSS plans should strive to cover more assessment and care plan elements over time.

FAQ ID:89071

SHARE URL

Do I need value sets to calculate any of the five the Managed Long Term Services and Supports (MLTSS) assessment and care planning measures? If so, where can I find the value sets?

Value sets are the complete set of procedure and diagnostic codes used to identify a service or condition included in a measure. One of the assessment and care planning measures—LTSS Reassessment/Care Plan Update after Inpatient Discharge—uses value sets to identify potentially planned hospitalizations. Please see "Do I need to use value sets to calculate these measures? If so, where can I find the value sets?" for more information regarding using value sets for the three institutional rebalancing and utilization measures.

View the value sets (XLSX, 2.88 MB). Please see Table 2 in the "LTSS Value Sets to Codes" tab. Table 1 in the "LTSS Measures to Value Sets" tab shows each value set needed for each measure.

FAQ ID:89076

SHARE URL

Can I use the same sample for the Managed Long Term Services and Supports (MLTSS) Part 1 of the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure as the LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update, LTSS Shared Care Plan with Primary Care Practitioner, and LTSS Reassessment/Care Plan Update after Inpatient Discharge measures?

Yes, the same sample can be used for Part 1 of the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure as the LTSS Comprehensive Assessment and Update, LTSS Comprehensive Care Plan and Update, and LTSS Shared Care Plan with Primary Care Practitioner measures.

FAQ ID:89081

SHARE URL

Must the Managed Long Term Services and Supports (MLTSS) LTSS Comprehensive Assessment and Update measure assessment take place in the home?

Yes, the assessment for the LTSS Comprehensive Assessment and Update measure is required to take place in the member’s home as a face-to-face discussion unless certain exceptions are met. These exceptions include circumstances in which:

  • The member was offered an in-home assessment and refused the in-home assessment (either refused to allow the care manager into the home or requested a telephone assessment instead of an in-home assessment).
  • The member is residing in an acute or post-acute care facility (hospital, skilled nursing facility, other post-acute care facility) during the assessment time period.
  • The state policy, regulation, or other state guidance excludes the member from a requirement for in-home assessment.

FAQ ID:89086

SHARE URL

What if a Managed Long Term Services and Supports (MLTSS) member refuses an LTSS Comprehensive Assessment and Update measure assessment?

There must be documentation of the refusal, which would result in exclusion from the measure. The rate of exclusion due to a member refusing to participate should also be reported along with the measure performance rate.

FAQ ID:89101

SHARE URL

What if a Managed Long Term Services and Supports (MLTSS) member could not be reached for an LTSS Comprehensive Assessment and Update measure assessment?

There must be documentation that at least three attempts were made to reach the member, and that the member could not be reached, which would result in exclusion from the measure. The rate of exclusion due to inability to reach a member should also be reported along with the measure performance rate.

FAQ ID:89106

SHARE URL

What was the traditional Medicaid Eligibility Quality Control (MEQC) program based on and how has it changed?

The traditional MEQC program at 42 CFR § 431.810 through 431.822 was originally designed to implement sections 1902(a)(4) “Administration Methods for Proper and Efficient Operation of the State Plan” and 1903(u) “Limitation of FFP for Erroneous Medical Assistance Expenditures” of the Social Security Act (the Act). The program required annual state reviews of Medicaid cases identified through a statistically valid statewide sample of cases selected from the state’s eligibility files. The reviews were conducted to determine whether the sampled cases meet applicable Medicaid eligibility requirements. The program evolved over time to allow states the option of selecting specific areas of focus within the Medicaid program for their annual MEQC reviews.

On July 5, 2017, CMS published a final regulation entitled “Changes to the Payment Error Rate Measurement (PERM) and Medicaid Eligibility Quality Control (MEQC) Programs (CMS-Medicaid Coordination of Benefits8- F).” This final rule updated the MEQC and PERM programs based on the changes to Medicaid and Children’s Health Insurance Program eligibility requirements under the Patient Protection and Affordable Care Act. The new regulation has restructured the MEQC program into an ongoing series of pilots that states are required to conduct during the two off-years between triennial PERM review years. The MEQC portions of the regulation are now covered by 42 CFR §§ 431.800-820.

FAQ ID:93416

SHARE URL

What deliverables must states furnish to the Centers for Medicare & Medicaid Services (CMS) per the new Medicaid Eligibility Quality Control (MEQC) regulation?

The regulation requires states to submit a pilot planning document to CMS by November 1 of the year in which each state’s PERM review year ends. The pilot planning document must describe how states will conduct their active and negative case reviews and must be approved by CMS before the MEQC pilots can begin. In addition, the regulation requires states to submit case-level reports and corrective action plans to CMS by August 1 of the year after the MEQC review period ends. The specifications for the MEQC pilot planning documents are provided in the MEQC sub-regulatory guidance effective August 29, 2018. More details on the specifications of the case-level reports and corrective action plans are included in a second round of guidance, MEQC sub-regulatory guidance effective October 22, 2018.

FAQ ID:93421

SHARE URL

How will the Medicaid Eligibility Quality Control (MEQC) program be realigned under the final regulation issued July 5, 2017?

As reconfigured under the final regulation of July 5, 2017, MEQC will work in conjunction with the Payment Error Rate Measurement (PERM) program. In those years when states undergo their triennial PERM reviews, the states will not conduct MEQC pilots. The latter will only be required in the two off-years between PERM review years. CMS has restructured the MEQC program so that it more effectively complements the PERM program and provides states with the necessary flexibility and opportunity to target specific problems or high-interest areas during the two off-years of the PERM cycle.

FAQ ID:93146

SHARE URL
Results per page