U.S. flag

An official website of the United States government

Frequently Asked Questions

Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.

Showing 1 to 6 of 6 results

Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?

The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.

FAQ ID:89006

SHARE URL

Is a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?

No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.

FAQ ID:89011

SHARE URL

What is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?

A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).

FAQ ID:89016

SHARE URL

Does CMS require states to submit their 2019 Upper Payment Limit (UPL) demonstrations using the Office of Management and Budget (OMB) approved templates for Inpatient Hospital services (IPH), Outpatient Hospital services (OPH), and Nursing Facility services (NF) UPLs?

Yes, CMS requires states to use all of the OMB approved templates for their 2019 (07/01/2018 to 06/30/2019) UPL demonstrations submitted to meet the annual UPL reporting requirement and with State Plan Amendment (SPA) submissions. When submitting UPL demonstrations, use the following naming convention: UPL_<UPL Demo Date Range>_<Service Type Abbreviation>_R<Region Number>_<State Abbreviation>_<Workbook Number>.xls. Here is an example of the naming convention: UPL_20170701-20180630_IP_R01_CT_01.xls.

FAQ ID:92196

SHARE URL

What are examples of what would be appropriate adjustments to the Upper Payment Limit (UPL) in step 9 (Adjustments to the UPL and UPL Gap Calculation) (field 408) of the template?

Variable 408 (Adjustment to the UPL Gap) is intended to allow states to report adjustments to their UPL gap, to the extent that these adjustments are not accounted for in other variables. Here, states could report broad-based increases or reductions in payment, such as a Medicaid volume adjustment for managed care expansion. The source of values input into variable 408 may differ by state. Whenever a state reports data in variable 408 it must include a comprehensive note describing the adjustment.

FAQ ID:92301

SHARE URL

For our Nursing Facility (NF) Upper Payment Limit (UPL) calculation we separate Medicaid allowable costs into three categories: salaries and benefits, operating costs, and property costs. Based on previous guidance from CMS, we do not apply an inflation factor to the property costs. In looking at the template, it appears the inflation factor is applied to all costs. Is this correct?

Where inflation is not applied to property costs, please separate out this cost from the Medicare UPL by reporting these amounts in variable 402 - Adjustment to the Medicare UPL.

FAQ ID:92361

SHARE URL
Results per page