Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?
The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.
FAQ ID:89006
SHARE URLIs a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.
FAQ ID:89011
SHARE URLWhat is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).
FAQ ID:89016
SHARE URLCan a state type information and data into unlocked fields in the Upper Payment Limit (UPL) templates or must the data from state-developed UPL reports/workbooks be mapped through, for example, V-Look-ups into the UPL templates?
Yes. Mapping data, through V-Look-ups, for example, is a much easier and consistent process for current and future UPL submissions. However, a state may choose to type information and data into unlocked fields in the UPL templates. When a state chooses to input data directly (not through a V-Look-up) into the template, it still must provide the supporting documentation with the source data. Additionally, the state should explain how it mapped data from the supporting documentation into the template. The Centers for Medicare & Medicaid Services utilizes the supporting information to confirm that the information in the templates is correct.
FAQ ID:92451
SHARE URLCan a contractor that acts on behalf of the Medicaid agency submit the Upper Payment Limit (UPL) demonstrations to CMS?
No, the information must be submitted by the State Medicaid Director (or designated state official).
FAQ ID:92246
SHARE URLIf we complete multiple inpatient templates for Diagnosis Related Groups (DRG) and per diem, should they be in the same file or separate files? Should there be a summary of all the inpatient Upper Payment Limits (UPLs) showing grand totals?
The state should complete one template each for the DRG and per diem UPL calculations and these should be placed in one file. The state should also include a summary worksheet in the same file that shows the UPL gap for each ownership category (state government owned, non-state government owned, and private). States should include all necessary supporting documentation.
FAQ ID:92276
SHARE URLThe Inpatient Hospital Services (IPH), Outpatient Hospital Services (OPH), and Nursing Facility (NF) templates do not include fields to sum the Upper Payment Limit (UPL) gap by ownership category (private, Non-State Governmental Organization (NSGO), State Government Ownded (SGO). How should these totals be presented in the template?
The total UPL gap by ownership category can be shown by inserting a new tab in the file with these calculations, unless a summary worksheet is already included in the workbook. If there are any questions about how to add this tab, please reach out to your CMS Regional Office or send a follow-up question (with your template) to the UPL mailbox and additional guidance will be provided.
FAQ ID:92281
SHARE URLOne of the required fields in the Nursing Facility template is the Medicare Provider Number (Medicare Certification Number - Variable 112), but not all facilities are Medicare certified. How should data be entered for these facilities since it is a required field?
When a Medicare provider number is not available, such as for some nursing facilities, the state should populate variable 112 using the acronym NMC, which stands for "Not Medicare Certified". Adding this information will help to clearly identify the facility's status.
FAQ ID:92286
SHARE URLHow should Upper Payment Limit (UPL) supplemental payments be entered in the template?
The state should report the expected amount of supplemental payments to be made during the period covered by the UPL demonstration. Supplemental payments should be entered into variables 303.1, 303.2, and 303.3 for the Inpatient Hospital and Outpatient Hospital templates and 313.1, 313.2, and 313.3 for the Nursing Facility templates. The state should provide detail in the notes tab on the types of supplemental payments and the related dollar amount of each payment.
FAQ ID:92291
SHARE URLHow should more than two adjustments to the per diem be addressed in the nursing facility template for both Medicare and Medicaid Per Diem?
A state may report adjustments by using the following variables: Adjustments to Medicare Per Diem #1 - Variable 212.1 and Adjustments to Medicare Per Diem #2 - Variable 212.2 for the Medicare Per Diem and Adjustment to Medicaid Per Diem #1 - Variable 314.1 and Adjustment to Medicaid Per Diem #2 - Variable 314.2 for the Medicaid Per Diem. A state may report more than one adjustment under a single variable. For example, if the state has three adjustments to their Medicaid per diem, one of these adjustments can be reported in variable 314.1 and the other two adjustments can be added together and reported in variable 314.2. When reporting any adjustment, the state must provide a detailed description of the adjustment(s) in the notes tab.
FAQ ID:92296
SHARE URL
Results per page