Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?
The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.
FAQ ID:89006
SHARE URLIs a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.
FAQ ID:89011
SHARE URLWhat is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).
FAQ ID:89016
SHARE URLOur state uses multiple cost centers (routine and ancillary) in the calculation of our inpatient hospital Upper Payment Limit (UPL). Do the templates permit the use of multiple cost centers?
Yes, the templates allow the use of multiple cost centers. For example, if the state uses a cost methodology for ancillary services and a per-diem methodology for routine services, the state will complete one cost template and one per-diem template in order to account for these two cost centers. Every hospital would be featured in each of the two templates; however, to differentiate their provider information, the state would append the Medicare Certification Number (Medicare ID) (variable 112) with a letter, such as an -A or a -B. For example, if the Medicare ID was 123456, it would be depicted in the cost template as 123456-A and in the per diem template as 123456-B. If a Medicare Certification Number is not available then the state should append the Medicaid Provider Number. If there are multiple cost centers under either the cost or per-diem methodology, the state would separate out the cost centers within their respective templates. Each cost center should be associated with only one appended letter and these should be described in the notes tab. When using multiple cost centers, the state should insert a new tab in the templates that summarizes the UPL gap calculations for each of the ownership categories (state government owned, non-state government owned, and private), unless a summary worksheet is already included in the workbook.
FAQ ID:92261
SHARE URLIf we complete multiple inpatient templates for Diagnosis Related Groups (DRG) and per diem, should they be in the same file or separate files? Should there be a summary of all the inpatient Upper Payment Limits (UPLs) showing grand totals?
The state should complete one template each for the DRG and per diem UPL calculations and these should be placed in one file. The state should also include a summary worksheet in the same file that shows the UPL gap for each ownership category (state government owned, non-state government owned, and private). States should include all necessary supporting documentation.
FAQ ID:92276
SHARE URLHow should more than two adjustments to the per diem be addressed in the nursing facility template for both Medicare and Medicaid Per Diem?
A state may report adjustments by using the following variables: Adjustments to Medicare Per Diem #1 - Variable 212.1 and Adjustments to Medicare Per Diem #2 - Variable 212.2 for the Medicare Per Diem and Adjustment to Medicaid Per Diem #1 - Variable 314.1 and Adjustment to Medicaid Per Diem #2 - Variable 314.2 for the Medicaid Per Diem. A state may report more than one adjustment under a single variable. For example, if the state has three adjustments to their Medicaid per diem, one of these adjustments can be reported in variable 314.1 and the other two adjustments can be added together and reported in variable 314.2. When reporting any adjustment, the state must provide a detailed description of the adjustment(s) in the notes tab.
FAQ ID:92296
SHARE URLDoes CMS participate in the state's life cycle gate reviews?
No. CMS does not participate the state's in E&E or in MMIS system development life cycle (SDLC) level reviews.
FAQ ID:95056
SHARE URLDoes the IV&V 18-month compliance period apply to E&E systems?
Yes. The rules pertaining to procuring IV&V contracts (State Medicaid Director Letter 16-010) apply to both E&E and MMIS.
FAQ ID:95061
SHARE URLDo the documents in the artifacts table need to be created for every module?
In most cases once they are created, the documents will simply be updated to account for the additional modules being planned or developed. A new document is not necessarily created for each module. If a state calls a document by a different name, the state should inform CMS of the name difference.
FAQ ID:95076
SHARE URLCALT is no longer available. Where should state artifacts and evidence be posted?
Granting CMS direct access to the state's evidence repository is the preferred method for making evidence available to CMS. If that is not possible, the state may make other secure arrangements with CMS, such as using encrypted File Transfer Protocol (FTP). It is critical to follow all Health Insurance Portability and Accountability Act (HIPAA) regulations when submitting evidence that contains personal health information (PHI) and personally identifiable information (PII).
FAQ ID:95081
SHARE URL
Results per page