Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Do states need to track people enrolled in the adult group who become pregnant? If a woman indicates on the application she is pregnant, do states need to enroll her as a pregnant woman if she is otherwise eligible for the adult group? Would there be a need to track pregnancy if the benefits for both groups are the same?
If a woman indicates on an initial application that she is pregnant, she should be enrolled in Medicaid coverage as a pregnant woman, rather than in the new adult group. However, as stated in the preamble to the March 23, 2012 Medicaid and CHIP Eligibility & Enrollment final rule , states are not required to track the pregnancy status of women already enrolled through the new adult group. Women should be informed of the benefits afforded to pregnant women under the state's Medicaid program and if a woman becomes pregnant and requests a change in coverage category, the state must make the change if she is eligible.
Supplemental Links:
- This FAQ was released as part of a larger set. View the full set. (PDF, 135.35 KB)
FAQ ID:92151
SHARE URLIf a woman moves from the adult group under 1902(a)(10)(A)(i)(VIII) to the pregnant woman group, are states then required to move former pregnant women from the pregnant women eligibility group back to the adult group when the post-partum period ends?
If a woman is enrolled in a group for pregnant women, before the end of the post-partum period, as specified in the definition of "pregnant woman" at 42 CFR 435.4, the state Medicaid agency will need to re-evaluate the woman's eligibility for other groups, including the lowincome adult group and advance payment of premium tax credits through the Marketplace. Our regulations at 42 CFR 435.916 explain the requirements for states in connection with renewals of eligibility or determinations of ineligibility based on a change in circumstances. The procedures outlined in the regulation are intended to promote continuity of coverage.
Supplemental Links:
- This FAQ was released as part of a larger set. View the full set. (PDF, 135.35 KB)
FAQ ID:92161
SHARE URLOne of the required fields in the Nursing Facility template is the Medicare Provider Number (Medicare Certification Number - Variable 112), but not all facilities are Medicare certified. How should data be entered for these facilities since it is a required field?
When a Medicare provider number is not available, such as for some nursing facilities, the state should populate variable 112 using the acronym NMC, which stands for "Not Medicare Certified". Adding this information will help to clearly identify the facility's status.
FAQ ID:92286
SHARE URLHow should more than two adjustments to the per diem be addressed in the nursing facility template for both Medicare and Medicaid Per Diem?
A state may report adjustments by using the following variables: Adjustments to Medicare Per Diem #1 - Variable 212.1 and Adjustments to Medicare Per Diem #2 - Variable 212.2 for the Medicare Per Diem and Adjustment to Medicaid Per Diem #1 - Variable 314.1 and Adjustment to Medicaid Per Diem #2 - Variable 314.2 for the Medicaid Per Diem. A state may report more than one adjustment under a single variable. For example, if the state has three adjustments to their Medicaid per diem, one of these adjustments can be reported in variable 314.1 and the other two adjustments can be added together and reported in variable 314.2. When reporting any adjustment, the state must provide a detailed description of the adjustment(s) in the notes tab.
FAQ ID:92296
SHARE URLCan the Outpatient Hospital (OPH) Services Upper Payment Limit (UPL) demonstration consider Clinical Diagnostic Laboratory (CDL) services?
Section 1903(i)(7) of the Social Security Act specifies a separate UPL for CDL services which limits payment to no more than the Medicare rate on a per test basis. To meet the statutory provision, the UPL for CDL services must be separately demonstrated from the OPH services UPL. States do not have the ability to "borrow room" from the CDL UPL and apply it to the OPH UPL.
FAQ ID:92401
SHARE URLHow do I withdraw a submission package?
A State may withdraw a submission package once it has been submitted to CMS. Withdrawing a submission package takes it out of contention and the submission package cannot be edited or resubmitted. Log in as State Point of Contact, and select the "Records" tab. Then select "Submission Packages" for your State. Next, select the link to the submission package you wish to withdraw. In the left panel, select "Related Actions". Next, select "Withdraw Submission Package". Then select the green button labeled "Withdraw Submission Package". A box will pop up, select "Yes". Once the submission package is withdrawn, you will be redirected to the Records screen. A yellow notification will appear briefly at the top of the page indicating "Action Completed Successfully".
FAQ ID:92891
SHARE URLHow do I allow CMS to view my submission package prior to submitting?
After the State Editor has forwarded the submission package to the State Point of Contact for Reviewing, the State Point of contact should log into MACPro. Then go to the "Records" tab and select "Submission Packages" for your state. Select the submission package you wish for CMS to view. In the left panel, select "Related Actions". Next, select "Allow CMS to View Screen". On the Allow CMS to View Screen page, select "Yes" under Visibility Setting, and then select the green "Update Visibility" button in the bottom right corner.
Note: Selecting this option will permit the CMS review team to see the screens in this submission package as they are now. It does not cause the package to be submitted as Draft or Official, and does not start a CMS review clock. Validation of the screens is not required. Notify your CMS contact that viewing is available and who you wish to see it; MACPro does not notify CMS staff. You can deselect this option at any time.
FAQ ID:92896
SHARE URLWhat functions can my role perform?
Refer to the table below.
| Role | Actions |
| State Editor (SE) |
|
| State Point of Contact (SPOC) |
|
| State Director (State Director) |
|
| State System Administrator (SSA) |
|
FAQ ID:92901
SHARE URLHow do I assign a SPA ID?
The SPA ID is assigned by the State Editor and entered in a field in Official Submission packages. The SPA ID (SS-YY-NNNN-xxxx) is assigned by the State in Official Submission Packages and consists of the State abbreviation (SS), they year (YY), a four character sequence number (NNNN), and an optional four character alpha and numeric (xxxx).
FAQ ID:92906
SHARE URLHow do I access previous submission packages for my state?
Select the "Records" tab in the upper tool bar. Select "Submission Packages" for your state and then search for the package you would like to view.
FAQ ID:92911
SHARE URL
Results per page