Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?
The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.
FAQ ID:89006
SHARE URLIs a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.
FAQ ID:89011
SHARE URLWhat is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).
FAQ ID:89016
SHARE URLCan a state type information and data into unlocked fields in the Upper Payment Limit (UPL) templates or must the data from state-developed UPL reports/workbooks be mapped through, for example, V-Look-ups into the UPL templates?
Yes. Mapping data, through V-Look-ups, for example, is a much easier and consistent process for current and future UPL submissions. However, a state may choose to type information and data into unlocked fields in the UPL templates. When a state chooses to input data directly (not through a V-Look-up) into the template, it still must provide the supporting documentation with the source data. Additionally, the state should explain how it mapped data from the supporting documentation into the template. The Centers for Medicare & Medicaid Services utilizes the supporting information to confirm that the information in the templates is correct.
FAQ ID:92451
SHARE URLDoes CMS require states to submit their 2019 Upper Payment Limit (UPL) demonstrations using the Office of Management and Budget (OMB) approved templates for Inpatient Hospital services (IPH), Outpatient Hospital services (OPH), and Nursing Facility services (NF) UPLs?
Yes, CMS requires states to use all of the OMB approved templates for their 2019 (07/01/2018 to 06/30/2019) UPL demonstrations submitted to meet the annual UPL reporting requirement and with State Plan Amendment (SPA) submissions. When submitting UPL demonstrations, use the following naming convention: UPL_<UPL Demo Date Range>_<Service Type Abbreviation>_R<Region Number>_<State Abbreviation>_<Workbook Number>.xls. Here is an example of the naming convention: UPL_20170701-20180630_IP_R01_CT_01.xls.
FAQ ID:92196
SHARE URLHow do I withdraw a submission package?
A State may withdraw a submission package once it has been submitted to CMS. Withdrawing a submission package takes it out of contention and the submission package cannot be edited or resubmitted. Log in as State Point of Contact, and select the "Records" tab. Then select "Submission Packages" for your State. Next, select the link to the submission package you wish to withdraw. In the left panel, select "Related Actions". Next, select "Withdraw Submission Package". Then select the green button labeled "Withdraw Submission Package". A box will pop up, select "Yes". Once the submission package is withdrawn, you will be redirected to the Records screen. A yellow notification will appear briefly at the top of the page indicating "Action Completed Successfully".
FAQ ID:92891
SHARE URLHow do I allow CMS to view my submission package prior to submitting?
After the State Editor has forwarded the submission package to the State Point of Contact for Reviewing, the State Point of contact should log into MACPro. Then go to the "Records" tab and select "Submission Packages" for your state. Select the submission package you wish for CMS to view. In the left panel, select "Related Actions". Next, select "Allow CMS to View Screen". On the Allow CMS to View Screen page, select "Yes" under Visibility Setting, and then select the green "Update Visibility" button in the bottom right corner.
Note: Selecting this option will permit the CMS review team to see the screens in this submission package as they are now. It does not cause the package to be submitted as Draft or Official, and does not start a CMS review clock. Validation of the screens is not required. Notify your CMS contact that viewing is available and who you wish to see it; MACPro does not notify CMS staff. You can deselect this option at any time.
FAQ ID:92896
SHARE URLWhat functions can my role perform?
Refer to the table below.
| Role | Actions |
| State Editor (SE) |
|
| State Point of Contact (SPOC) |
|
| State Director (State Director) |
|
| State System Administrator (SSA) |
|
FAQ ID:92901
SHARE URLHow do I assign a SPA ID?
The SPA ID is assigned by the State Editor and entered in a field in Official Submission packages. The SPA ID (SS-YY-NNNN-xxxx) is assigned by the State in Official Submission Packages and consists of the State abbreviation (SS), they year (YY), a four character sequence number (NNNN), and an optional four character alpha and numeric (xxxx).
FAQ ID:92906
SHARE URLHow do I access previous submission packages for my state?
Select the "Records" tab in the upper tool bar. Select "Submission Packages" for your state and then search for the package you would like to view.
FAQ ID:92911
SHARE URL
Results per page