Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Should the rate of required exclusions be reported with the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure's Part 1 performance rate?
The measure excludes plan members who are not ambulatory from the measure rate, but it is not necessary to report the number of members excluded with the measure’s performance rate.
FAQ ID:89006
SHARE URLIs a specific screening tool required for the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
No, a specific screening tool is not required for this measure. However, potential screening tools may include the Morse Fall Scale and timed Get-Up-And-Go test.
FAQ ID:89011
SHARE URLWhat is the difference between a screening (Part 1) and a risk assessment (Part 2) for the purposes of calculating the Screening, Risk Assessment, and Plan of Care to Prevent Future Falls measure?
A falls screening is an evaluation of whether a Managed Long Term Services and Supports plan member has experienced a history of falls and/or problems with balance or gait. A falls risk assessment includes a balance/gait assessment and one other assessment component and should only be performed for members with a documented history of falls (at least two falls or one fall with injury in the past year).
FAQ ID:89016
SHARE URLWhat materials does CMS require a state to submit as part of the Upper Payment Limit (UPL) Demonstration submission package?
The submission package consists of the completed templates and any supporting documentation needed to understand the UPL demonstration. This could include the completed Guidance document and supporting documentation (in Microsoft Excel with formulas included, not as a PDF) that is necessary to further explain a state's UPL demonstration, and a summary spreadsheet that aggregates the UPL gap for each of the ownership categories (state government owned, non-state government owned, and private).
FAQ ID:92236
SHARE URLHow should more than two adjustments to the per diem be addressed in the nursing facility template for both Medicare and Medicaid Per Diem?
A state may report adjustments by using the following variables: Adjustments to Medicare Per Diem #1 - Variable 212.1 and Adjustments to Medicare Per Diem #2 - Variable 212.2 for the Medicare Per Diem and Adjustment to Medicaid Per Diem #1 - Variable 314.1 and Adjustment to Medicaid Per Diem #2 - Variable 314.2 for the Medicaid Per Diem. A state may report more than one adjustment under a single variable. For example, if the state has three adjustments to their Medicaid per diem, one of these adjustments can be reported in variable 314.1 and the other two adjustments can be added together and reported in variable 314.2. When reporting any adjustment, the state must provide a detailed description of the adjustment(s) in the notes tab.
FAQ ID:92296
SHARE URLHow do I withdraw a submission package?
A State may withdraw a submission package once it has been submitted to CMS. Withdrawing a submission package takes it out of contention and the submission package cannot be edited or resubmitted. Log in as State Point of Contact, and select the "Records" tab. Then select "Submission Packages" for your State. Next, select the link to the submission package you wish to withdraw. In the left panel, select "Related Actions". Next, select "Withdraw Submission Package". Then select the green button labeled "Withdraw Submission Package". A box will pop up, select "Yes". Once the submission package is withdrawn, you will be redirected to the Records screen. A yellow notification will appear briefly at the top of the page indicating "Action Completed Successfully".
FAQ ID:92891
SHARE URLHow do I allow CMS to view my submission package prior to submitting?
After the State Editor has forwarded the submission package to the State Point of Contact for Reviewing, the State Point of contact should log into MACPro. Then go to the "Records" tab and select "Submission Packages" for your state. Select the submission package you wish for CMS to view. In the left panel, select "Related Actions". Next, select "Allow CMS to View Screen". On the Allow CMS to View Screen page, select "Yes" under Visibility Setting, and then select the green "Update Visibility" button in the bottom right corner.
Note: Selecting this option will permit the CMS review team to see the screens in this submission package as they are now. It does not cause the package to be submitted as Draft or Official, and does not start a CMS review clock. Validation of the screens is not required. Notify your CMS contact that viewing is available and who you wish to see it; MACPro does not notify CMS staff. You can deselect this option at any time.
FAQ ID:92896
SHARE URLWhat functions can my role perform?
Refer to the table below.
| Role | Actions |
| State Editor (SE) |
|
| State Point of Contact (SPOC) |
|
| State Director (State Director) |
|
| State System Administrator (SSA) |
|
FAQ ID:92901
SHARE URLHow do I assign a SPA ID?
The SPA ID is assigned by the State Editor and entered in a field in Official Submission packages. The SPA ID (SS-YY-NNNN-xxxx) is assigned by the State in Official Submission Packages and consists of the State abbreviation (SS), they year (YY), a four character sequence number (NNNN), and an optional four character alpha and numeric (xxxx).
FAQ ID:92906
SHARE URLHow do I access previous submission packages for my state?
Select the "Records" tab in the upper tool bar. Select "Submission Packages" for your state and then search for the package you would like to view.
FAQ ID:92911
SHARE URL
Results per page