U.S. flag

An official website of the United States government

Frequently Asked Questions

Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.

Showing 11 to 20 of 71 results

If a state is reusing an MMIS system or module already certified in another state do they need to go through certification review and decision?

CMS encourages states to reuse modular solutions as much as possible. If a state can reuse a modular solution from another state with minimal changes or customization, CMS will work with the state to streamline the certification process as much as possible to leverage knowledge of the reused solution. However, CMS will still require a certification decision for each state implementation of reused solutions to ensure compliance with federal regulations.

FAQ ID:94896

SHARE URL

Which of the checklist paths (MITA, Module, Custom) described in the MECT are best for a state implementing a services-type solution?

All the criteria in the checklists (MITA, MMIS or Custom) are the same. The difference between checklists is the criteria organization within the checklists. If the services solution is innovative, unique, or an unconventional approach, then the custom checklist approach might be appropriate. The RO will work with the state and vendors to decide which checklist set is best suited for the state's certification. Both service and traditional-type solutions need to meet all certification criteria to ensure compliance with federal regulations.

FAQ ID:94901

SHARE URL

If the state conducts a staged rollout for implementing new MMIS Medicaid modules, will CMS pay for the overlapping costs?

Yes, CMS will support the costs for this kind of MMIS transition. We encourage states to ensure that both the current vendor's and new solutions provider's contracts account for this transition period and address a prorating of cost during this time. States should minimize the costs of transition by performing due diligence on the anticipated spending. The legacy system provider should be compensated for its role in ensuring a smooth transition, with a ramp-down of other operational costs. The new solutions provider should have deliverables in its contract that speak to the soft launch or phased launch approach, with an uptick in operational costs as the transition progresses.

FAQ ID:94906

SHARE URL

What security and privacy documents are state Medicaid agencies required to have for their MMIS?

State Medicaid agencies are required to have MMIS System Security Plan and Privacy Impact Assessment documents. State Medicaid agencies must perform regular routine security and privacy risk assessments to ensure the protection and safeguard of beneficiary data that is consistent with Health Insurance Portability and Accountability Act (HIPAA) privacy and security rules. Please refer to the MECT for more details: https://www.medicaid.gov/medicaid/data-and-systems/mect/index.html

FAQ ID:94911

SHARE URL

Can the Systems Integrator (SI) be awarded contracts for development of modular components within the MMIS project?

Yes. While CMS envisions a discrete role for the System Integrator (SI) in each state, with specific focus on ensuring the integrity and interoperability of the Medicaid IT architecture and coherence of the various modules incorporated into the Medicaid system complex, it is permissible for an SI to provide modules as part of the overall solution. The target outcome for the SI in support of the state should be to foster best-in-breed solutions for Medicaid business requirements, with the SI responsible for the successful integration of the chosen solutions and infrastructure into a seamless functional system. The SI must ensure that all modules have open APIs and remain loosely coupled. More information on the SI role can be found in Section 1.7 of the Medicaid Enterprise Certification Life Cycle, part 01 of the MECT. States are encouraged to use an acquisition approach that limits the potential for conflict of interest an SI may have in choosing the modular solutions to be incorporated into the system. As described above, the goal is to avoid lock-in to a single vendor or an otherwise closed set of solutions.

FAQ ID:94916

SHARE URL

Can a state decide to be its own MMIS systems integrator?

CMS encourages the use of an SI outside the state agency, but states can consider themselves in that role if they can support that effort and if that decision is made with consultation and agreement from CMS. For more information about the role of the SI, see Section 1.7 in part 01 of MECT Medicaid Enterprise Certification Life Cycle. https://www.medicaid.gov/medicaid/data-and-systems/mect/index.html

FAQ ID:94921

SHARE URL

What browsers are compatible with MACPro?

Browser Comments
Microsoft Internet Explorer 11, 10, 9, and 8

Microsoft Internet Explorer 10, 9, and 8 are depreciated and will not be supported in a future release of MACPro.

Microsoft Internet Explorer 11 is supported on Windows 8.x tablet.

Mozilla Firefox Mozilla Firefox updates automatically. MACPro supports the most recent stable version of Mozilla Firefox.
Google Chrome Google Chrome updates automatically. MACPro supports the most recent stable version of Google Chrome.
Apple Safari Apple Safari is only supported on Mac operating systems.

FAQ ID:92846

SHARE URL

Is there spell check in MACPro?

The spell check function is determined by your web browser and is not a feature within MACPro itself. Within Internet Explorer, there is an option to turn spelling correction on or off.

  1. Under "Settings," choose the "Programs" tab and then select "Manage add-ons."
  2. On the left hand tool bar, there is a "Spelling Correction" Add-on Type. There is a box labeled "Enable Spelling Correction" that can be selected.
  3. Select "Enable spelling correction".

FAQ ID:92851

SHARE URL

Who should be contacted with questions?

If there are questions or problems related to the system/website, please contact the MACPro Help Desk staff via email to MACPro_HelpDesk@cms.hhs.gov. If there are questions regarding the quality measure content or reporting please contact MAC Quality TA via the contact link at the bottom of the screen or by email to MACQualityTA@cms.hhs.gov.

FAQ ID:92726

SHARE URL

How do I add new users to the system?

User Management is a feature in MACPro that works in conjunction with the CMS EIDM user identification and authentication system. To request access to the MACPro application, a user must first go to the Enterprise Identity Management Portal (EIDM: https://portal.cms.gov ) and create an EIDM ID. Once an ID is created, the user must request access to the MACPro application by way of an EIDM role. Once their EIDM role request is approved, they may access MACPro via the link https://macpro.cms.gov  and enter their newly created EIDM credentials to log in. Once in MACPro, the user must request their MACPro roles and attributes via My User Profile under the Records tab. MACPro user role requests are approved by the State System Administrator, CMS System Administrator, or CMS Role Approver. Further detailed instructions can be found in the reference documents posted to Medicaid.gov (https://www.medicaid.gov/state-resource-center/medicaid-and-chip-program-portal/medicaid-and-chip-program-portal.html).

FAQ ID:92731

SHARE URL
Results per page