Frequently Asked Questions are used to provide additional information and/or statutory guidance not found in State Medicaid Director Letters, State Health Official Letters, or CMCS Informational Bulletins. The different sets of FAQs as originally released can be accessed below.
Frequently Asked Questions
Does CMS require states to submit their 2019 Upper Payment Limit (UPL) demonstrations using the Office of Management and Budget (OMB) approved templates for Inpatient Hospital services (IPH), Outpatient Hospital services (OPH), and Nursing Facility services (NF) UPLs?
Yes, CMS requires states to use all of the OMB approved templates for their 2019 (07/01/2018 to 06/30/2019) UPL demonstrations submitted to meet the annual UPL reporting requirement and with State Plan Amendment (SPA) submissions. When submitting UPL demonstrations, use the following naming convention: UPL_<UPL Demo Date Range>_<Service Type Abbreviation>_R<Region Number>_<State Abbreviation>_<Workbook Number>.xls. Here is an example of the naming convention: UPL_20170701-20180630_IP_R01_CT_01.xls.
FAQ ID:92196
SHARE URLOur state uses multiple cost centers (routine and ancillary) in the calculation of our inpatient hospital Upper Payment Limit (UPL). Do the templates permit the use of multiple cost centers?
Yes, the templates allow the use of multiple cost centers. For example, if the state uses a cost methodology for ancillary services and a per-diem methodology for routine services, the state will complete one cost template and one per-diem template in order to account for these two cost centers. Every hospital would be featured in each of the two templates; however, to differentiate their provider information, the state would append the Medicare Certification Number (Medicare ID) (variable 112) with a letter, such as an -A or a -B. For example, if the Medicare ID was 123456, it would be depicted in the cost template as 123456-A and in the per diem template as 123456-B. If a Medicare Certification Number is not available then the state should append the Medicaid Provider Number. If there are multiple cost centers under either the cost or per-diem methodology, the state would separate out the cost centers within their respective templates. Each cost center should be associated with only one appended letter and these should be described in the notes tab. When using multiple cost centers, the state should insert a new tab in the templates that summarizes the UPL gap calculations for each of the ownership categories (state government owned, non-state government owned, and private), unless a summary worksheet is already included in the workbook.
FAQ ID:92261
SHARE URLOur state uses multiple cost centers with varying cost-to-charge ratios in our calculation of the inpatient hospital Upper Payment Limit (UPL). Does the template accommodate this?
Yes, the template allows the use of multiple cost centers with multiple cost-to-charge ratios. The state would separately report the costs and payments associated with each of the cost centers in the cost template. To differentiate the cost centers, the state would append the Medicare Certification Number (Medicare ID) (variable 112) with a letter, for example an -A, -B, or -C, that would be used as a unique identifier for each cost center.
FAQ ID:92266
SHARE URLOur state uses multiple methodologies for the three ownership categories in the calculation of our inpatient hospital Upper Payment Limit (UPL). Do the templates permit the use of multiple methodologies?
Yes, the templates allow the use of multiple methodologies. The state would complete the templates associated with the UPL methodologies used. For example, if the state uses a cost-based methodology for state owned hospitals and a payment-based methodology for private hospitals, then the state would complete the cost template for the state owned hospitals and the payment template for the private hospitals. When using multiple methodologies, the state should insert a new tab in the templates that summarizes the UPL gap calculations for each of the ownership categories (state government owned, non-state government owned, and private), unless a summary worksheet is already included in the workbook.
FAQ ID:92271
SHARE URLFor our Nursing Facility (NF) Upper Payment Limit (UPL) calculation we separate Medicaid allowable costs into three categories: salaries and benefits, operating costs, and property costs. Based on previous guidance from CMS, we do not apply an inflation factor to the property costs. In looking at the template, it appears the inflation factor is applied to all costs. Is this correct?
Where inflation is not applied to property costs, please separate out this cost from the Medicare UPL by reporting these amounts in variable 402 - Adjustment to the Medicare UPL.
FAQ ID:92361
SHARE URLHow and when should the Medicaid hospital tax/provider assessment be included in the inpatient hospital template?
The cost of the tax should be reported in Variable 401 - MCD Provider Tax Cost. A state may separately report the Medicaid portion of the cost of a provider assessment/tax only when it is using a cost based methodology to calculate the UPL. A state may not include this cost when calculating a DRG or Payment based UPL demonstration.
FAQ ID:92366
SHARE URLHow should cost data reported for a partial year be treated either when one hospital acquires another hospital or a hospital ceases operation?
When a hospital acquires another hospital, the state should use all available data to determine the UPL and work with CMS to assure appropriate reporting. When a hospital ceases operation, the state should not annualize data if it does not cover a 12-month period.
FAQ ID:92391
SHARE URL